aseball fans take note.
Arizona's Hohokam Park in Mesa,
Ariz., may ring a bell as the
spring training grounds of the Chicago Cubs baseball team. It
is named for the far-flung, extinct
Hohokam Indians who played their
own brand of ball and worked those
same fields centuries before.
They were the master farmers of America's Southwest, and engineers
of great networks of irrigation
canals in the Salt River Valley. They first appeared about
350 B.C., building canals of open
ditches, gouged out with stone
tools and wooden hoes. The canals
spanned almost 250 miles, stimulating
trade and commerce between communities
of hundreds and thousands of people.
No one knows why, whether by climatic
upheaval, drought or floods, the
Hohokams suddenly vanished in
1450 A.D., well before Columbus discovered America or the Pilgrims landed
at Plymouth Rock.

Left: American water pipes originally
were made from bored-out logs
like this artifact.
The Pueblo Grande ruins of this lost culture sit in
ironic view of the jet planes
taking off at the Phoenix airport. Located on East
Washington Street, they provide
a specter of dry bank canals 80
feet wide and 20 feet deep. Strange
trash mounds offer clues of organic
wastes, vegetation and shells.
And multi-storied "apartment"
buildings attest to a condo style
of life. But there is no evidence
of any piping, latrines or privies.
Native Americans, it is explained,
have always shunned communal spots
for defecation.
New World settlers would copy the Indians casual
discharge of waste and refuse
in running water, open fields,
shrubs or forests. Like their
folks back home in Europe, the colonials would also toss garbage
and excrement out the front door
and windows onto the streets below.
The country's first garbage disposers
would be hogs and scavengers.
It would be more than midway through the 19th century
before young America would develop reasonably efficient water and sewage
systems, and for the great invention
of the water closet to make an
appearance. But our forefathers
made up nicely for lost time.
Thanks to the plumbing industry,
the United States would set standards in
health and safety unsurpassed
m the world today. At the forefront
was the unsung plumber, the skilled
craftsman of lead, expert bell
hanger, blacksmith, tool maker,
tin and sheet-iron worker.
Closet Lore: Over 2,800 years ago, the
fabled King Minos of Crete owned the world's first flushing water closet,
complete with a wooden seat. Lost
for centuries in the rubble of
the palace ruins, the invention
did not materialize again until
1594. Then, Sir John Harington built a "prive in perfection"
for his godmother, Queen Elizabeth,
to use in Richmond Palace, and one for himself at his humbler estate.
Once he published his pompous
book of terrible puns and off
color jokes about the new device
in 1596, A New Discourse of a
State Subject, Called the Metamorphosis
of Ajax, the ridicule and scorn
would hound him for the rest of
his days, and he never built another
one. ("Ajax" was the slang in
those days for a privy or "a
jakes.") To the world's misfortune,
another 200 years would pass before
the idea took hold again.
Thus, when the colonists packed for the New World, they probably tucked
a chamber pot in among other crockery
items and tinware. But to a backwoodsman
or a bride of 14, the term "chaise
percee" or "commode"
often disguised its use. In the
early 1800s, a settler's wife
reportedly bought several from
the new stock at the local store
for kitchen and table use.
The privy or outhouse slowly became accepted, albeit
a peril for those walking by.
One diarist disgustedly wrote:
'Privy houses set against ye Strete
which spoiling people's apparill
should they happen to be nare
when ye filth comes out ... Especially
in ye Night when people cannot
see to shun them."
From the more humble and ramshackle outhouses of
wood emanated more glorious structures.
Human nature as it is, some became
symbols of distinction as would
current bathrooms of the well-to-do. William Byrd's 1730 outhouse
was made of brick and had five
holes. Byrd was chef magistrate
of the colonial court and thus
sat on the largest seat at the
center of a raised, semicircular
bench. So did Mr. Byrd preside
in the family privy.
Dozens of years later a two-story model was built
and still stands in Crested Butte, Colo. The upper level was used
when heavy snow blocked the first
floor. A more typical, single-hole
outhouse is found in a replica
located in Old Sturbridge, Mass.
How to bring a workable water closet into the house
without mess or odor was an invention
waiting to be born, however. Some
of the country's leading citizens
would try to improvise on the
basic knowledge of the times.
Thomas Jefferson, for example, devised
an indoor privy at his Monticello home by rigging up a system of pulleys. Servants
used the device to haul away chamber
pots in his earth closet (a wooden
box enclosing a pan of wood ashes
below, and a seat with a hole
cut out at the top). An architect
and inventor as well as statesman, Jefferson also built two octagonal
outhouses at his retreat at Poplar Forest in Virginia.
In the early 1840s, the architect and designers
of New
York City's Central
Park denounced the outhouse as 'troublesome,
unhealthy, indelicate, and ugly."
It was all true. They tried to
correct this by designing little
Gothic structures combining a
summer-house with a view of the
garden on one side, and a two-holer
on the other. Outside of a few
private homes, hotels were the
bastions of luxury and comfort
- and indoor plumbing. In 1829,
the brilliant young architect,
26-year-old Isaiah Rogers,
sent ripples of awe throughout
the country with his innovative
Tremont Hotel in Boston. It was the first hotel
to have indoor plumbing and became
the prototype of a modern, first
- class American hotel.
The four-story structure boasted eight water closets
on the ground floor, located at
the rear of the central court.
The court was connected by glazed
corridors to the bedroom wings,
dining room and rotunda.
The bathrooms in the basement were fitted with
cold running water which also
went to the kitchen and laundry.
The bathtubs were copper or tin
and probably had a little side-arm
gas furnace attached at one end.
Perhaps shaped like a shoe as
the French and English models,
the water in the tub would flow
and circulate backwards until
the entire bath was heated to
satisfaction.
Since the 1790s, the Northeast had bath houses,
but not until this period several
decades later would city hotels
or new dwellings have baths as
well. This simply was not feasible
without a suitable water and waste
supply system.
In the Tremont, water was drawn from a metal storage
tank set on top of the roof, the
recently-invented steam pump raising
the water on high. A simple water
carriage system removed the excretal
water to the sewerage system.
As with other individual buildings
of the time, each had its own
source of water and removal.
Five years later in New York City, Rogers surpassed his achievements
of the Tremont Hotel.
He built the Astor House with six stories, featuring
17 rooms on the upper floors with
water closets and bathrooms to
serve 300 guest rooms. The Astor
and the Tremont were the first
modem buildings built with extensive
plumbing. (In contrast, the Statler
Hotel in Buffalo caused a sensation
in 1908 by offering 'A room with
a bath for a dollar and a half.')
Rogers the architect was in very good company.
His former employer was Solomon
Willard, who had developed
the first widely-used American
system of central heating.
In the 1830s, at least one private house, a James River mansion, had a wood-fired
hot air heating system. Heat wafted
up to the first floor via handsome
brass registers. Ladies of New York City's High Society wasted
no time in flocking to the parlor
after dinner to stand over its
registers for warmth.
Central heating, however, was generally confined
to the public rooms and hallways.
Guest rooms were still heated
during this period by parlor stoves
and fireplaces. This lack of heat
throughout the home retarded the
development of bathrooms.
Our Dirty Forerunners: It was said that no house
in Quincy, Mass., had a bathroom before
1820. When the temperature of
a bedroom dips below the freezing
point, there is no satisfaction
in bathing.
Most Colonial bathing consisted of occasional dips
in ponds or streams. Typical was
a quote from Elizabeth Drinker,
the wife of a highly-placed Philadelphia Quaker. She had a shower (probably a bucket arrangement)
put up m her backyard for therapeutic
use in 1799. She said, 'I bore
it better than I expected, not
having been wett all over at once,
for 28 years past."

Left: A Copper lined closet,
with oak high tank and seat.
When bathing did become the rage, it evolved over
quack hygiene rather than cleanliness.
Then there emerged a blend of
latrine and spa just like in Merrie
Old England.
In aping the customs of fashionable Britain, one historian commented
that dueling probably killed fewer
people than the spas springing
up in various parts of the country.
If the mineral waters tasted or
smelled foul enough, people believed
they could cure anything that
ailed them. In the latter 1770s,
Colonials would soak and sip in
fashion as their counterparts
at Bath or Spa, England, imitating the good society
of the Old Country.
Warm Springs, Pa., in 1775 drew people from
all over, taking in the waters.
Some lived in cabins, all cooking
at a common fire. Gentile boarding
houses and pumps were built, and
dancing rooms added to the pleasantries.
The adjacent mosquito-rich swamps
were drained, and the church was
enlarged to keep pious visitors
happy.
A Dr. Benjamin Rush had the bad luck to have a
well with horrible-tasting water
in his back yard. The whole town
flocked to it to cure all kinds
of ailments. When the overpumped
well went dry, the people learned
too late that the well connected
to the doctor's privy.
Many thought bathing was a health hazard. In 1835,
the Common Council of Philadelphia almost banned wintertime
bathing (the ordinance failed
by two votes). Ten years later, Boston forbade bathing except
on specific medical advice.
Poor water supply contributed to this attitude.
The bathtub had to be filled and
emptied with a hand pump and pail.
It was too onerous a chore.
But by 1845, the installation of sanitary sewers
began to pay off with an outlet
for waste water, indoor plumbing
and working water closets were
getting closer to fruition. Unfortunately,
bad plumbing and the stench from
open sewer connections made some
new homes uninhabitable.
Early in the 19th centery, the stack was vented
through the roof, but no one knew
how to property size the pipe.
Usually the size was understated.
Many vent pipes were so small
they would clog up with frost
during the winter. Not long after,
a crown vent was added, i.e.,
the connection was made at the
top of the vent.
In 1874, there was a tremendous breakthrough when
an unknown plumber solved the
problem of venting. He suggested
balancing the air pressure in
the system with the outside atmospheric
pressure to prevent the siphonage
or blowout of a water seal in
the traps. He installed 1/2"
pipe at the traps and extended
the pipe outside. It worked for
a little while, but then the vent
clogged and the stench returned.
Through trail and error, the plumbers
learned to increase the size of
the pipe.
Boring Business: Early settlers knew nothing
of lead or iron pipe - they knew
only to build with wood, the country's
bounty.
Water pipes were made of bored-out logs, preferably
felled from hemlock or elm trees.
The trees would be cut into seven-to-nine-foot
lengths, their trunks around 9-10"
thick.
Wooden pipe laid below ground created several problems,
however, especially in larger
settlements or towns. Uneven ground
below the joists would cause sags
in the log where water would stagnate,
infest with insects, and generally
leave a woody taste.
The borers themselves were colorful characters
who usually traveled in pairs
from town to town bringing news
and gossip of the area as they
went about their job. With a five-foot
steel auger between them, a handle
at one end, they would fix the
log by eye, size it up with a
point of the ax, and drill or
bore out the center. Ramming one
end to make a conical shape, they
would jam the logs together in
a series, using a bituminous-like
pitch or tar to caulk the joists.
Sometimes they would split the
log and hollow it out, put it
together, connect the logs with
iron hoops, or get the blacksmith
to caulk the logs with lead.
They would set up a gravity water system, starting
from a spring or stream on high
ground, allowing water to flow
downhill to the house or farm.
It would cut a path back of the
house, through the barn, and flow
into a catch basin.
In 1652, Boston incorporated the country's first
waterworks, formed to provide
water for firefighting and domestic
use. As fire was a common hazard
in those days of wood-framed houses
and stores, and chimney fires
always a risk, it was imperative
that a ready supply be on hand.
The line supplying water to Boston's wharves and other buildings
ran from Jamaica Pond to the Faneuil Hall area, the meeting place
for the Massachusetts rebels who held their Boston Tea Party in the nearby
harbor on Dec.16, 1773. Just recently
a section of a wooden water main
was removed from that same vicinity.
The log measured 22 feet long,
the bore a 4" I.D. for the
lower half of the tree, and 2-1/2"
in the upper. Common with early
wood pipe, the tree's natural
forks branched out in wyes and
tees.
In 1795, the Jamaica Pond Aqueduct Corp. followed
through with 15 miles more of
3" and 5" wooden water
pipe of bored logs, again using
hemlock trees for construction.
Since open wells provided easy
access to contamination from nearby
privies, the new supply of fresh
water contributed to a lower death
rate.
Crude by almost anyone's standards, these new pipelines
were nonetheless invaluable to
firefighters. They would punch
a hole into the wooden pipe along
the edge of the street, insert
a smaller pipe., presized to fit
the newly borred hole and harness
the hose of their fire wagon,
a two man pumper. The fire out,
they would plug up the hole again
with a pre-cut conical stopper
on the end of a long pole, insert
it into the hole, and bang it
shut. This was the " fireplug,
" the wooden pole left sticking
out of the ground marking the
plug, ready to be pulled out for
the next chimney fire.
Wooden pipes were common until the early 1800s
when the increased pressure required
to pump water into rapidly expanding
streets began to split the pipes
A change was made to iron.
Waterworks Come Of Age: In 81804, Philadelphia earned the distinction
as the first city in the world
to adopt cast iron pipe for its
water mains. It was also the first
city in America to build large scale waterworks as it drew
upon the ample supply of the Schuykill River. A friendly neighbor, Philadelphia sold its cast- off wooden
pipe to Burlington, N.J., where it remained in
use until 1887, when larger mains
were required.
Those were the days when the science of medicine
in its infancy, and misguided
notions of causes of disease ruled
the day. Philadelphia was motivated to clean
up its city and draw upon a new
supply of water in the mistaken
belief that yellow fever was caused
by the city's polluted wells rather
than the bite of the mosquito.
Yellow fever hit Philadelphia in 1793 with an impact
like the Great Plagues of London.
Efficient waterworks depends on pumps. Prior to
steam power in the 1800s, water
wheels harnessed river flow to
raise the water. On the frontier
and on farms, windmills and simple
hydraulic pumps provided the most
efficient means of pumping water
for the entire farmyard. A storage
tank large enough to hold two
or three days' supply of water
would be mounted on the upper
floor of the barn, water then
piped to individual locations
By the latter 1800s, windmills would still be,
in full force, their new and better
workings keeping the farmers son
from the lure of the big city.
Who could resist this 1893 sale
pitch from Aermotor Company
"Many a farmer's boy has been content to remain
home through the great assistance
rendered him by the Geared Aermotor.
This tireless worker not only
pumps water, but turns the grindstone,
saws the wood, shells corn, chums,
and a dozen other things that
are most disagreeable to the boy,
and that would tend to discourage
him and make him discontented."
But metropolitan cities require more than windmills
or simple hydraulic pumps to generate
a water supply for an entire population,
especially for those in the throes
of the Industrial Revolution.
The population of Chicago, for example, soared from
350 people in 1835 to over 60,000by
mid-century. In 1869, the city
unveiled a new engineering feat
that made newspaper headlines
around the world.
Left: An early 20th century
outhouse with a fanciful design.
The Chicago Waterpower supplied the city with water
via a twin-tunnel system which
extended two miles out into Lake Michigan. Offshore, the clear take
water entered an underwater shaft
leading to the tunnel below the
lake bed, the intake shaft protected
by a wooden crib.
The first tunnel, completed in 1869, completed
in 1869, contained a massive three
foot-wide, 138, foot-tall standpipe
which equalized pressure in the
mains throughout the city's water
system. The building was miraculously
spared in the Great Chicago Fire of 1871, and still
stands as a monument to the city's
past.
Coal-fired, steam-driven engines drew water from
the tunnel beneath the lake. They
provided 15 million gallons per
day into the city's water mains.
When the pumping station was modernized
in 1906 and new engines installed,
the standpipe was removed. The
station today contains six powerful
engines which pump 72.5 million
gallons on an average day.
Sewers, PLEASE: Although Chicago is credited
with having the first comprehensive
sewerage project in the country
(designed by E. S. Chesbrough in 1885), the already teeming
city of New York provided the
general model for the development
of water supply and sewage disposal
systems across the country.
Water was always at a premium in Manhattan, from day one of its purchase
from the Indians in 1626. A bucket
of water had to be hand-drawn
and carried from springs or wells.
Those too far away relied on peddlers
who made rounds selling water
by the bucket, off water carts
or barrels. Later, water would
be rationed at street pumps or
hydrants which would operate frequently
during the day.
Waste and garbage thrown onto the streets created
abominable conditions, though
people were merely following centuries
old customs. hey were compounded
by privy stations set against
buildings whose "cleanup"
presented even more problems.
As early as 1700, concerned officials
passed an ordinance prohibiting
scavengers from dumping "tubs
of filth" in the streets.
But driving wells and digging cisterns to collect
water were still the primary means
of procuring water throughout
most settlements. However, water
was not a popular beverage during
those early days. A little girl
from Barbados boarding with her grandmother in 1714 while the
eight-year-old attended school
in Boston, complained to her father that grandmother
was making her drink water. Dad
wrote back and insisted that she
get beer or wine as befitting
her station.
This distaste for water probably harkened back
to the medieval notion that water
caused the chills, plague and
all sorts of ailments. The more
likely reason was that the privy
and the local well were too close
together and spawned cholera and
typhoid instead of good taste
and purity.
In the early 1700s, New York, as did Boston, had constructed a wooden
pipe system under the roads, and
sold water at street pumps or
hydrants. It would take New
York another 25 years to lay underground
sewers for storm water as well.
Another 50 years passed before New York constructed a truly viable
public waterworks system. In this
plan, well water was pumped to
an above-ground reservoir and
distributed via water mains of
cast iron. The main carried the
water to fire hydrants along the
narrow streets. But five years
later, the system broke down in
the chaos of the great New York fire of 1835, which destroyed
530 buildings. The water supply
could not cope with the demand
of the firefighters.
In response to the needs of its firefighters and
to provide potable water for the
already teeming population, the
city revamped its designs and
developed a more sound, pressurized
system.
Completed in 1842, the Croton Aqueduct System transported
water from a huge reservoir in
Croton, 40 miles north of the
city, to a secondary reservoir
on 42nd Street, and to another in Central Park. They fed into a network
of underground mains. Now it was
possible to supply buildings with
running water. However, except
for a simple water carriage operation,
there was no provision for waste
water.
Engineer Julius W. Adams provided the framework
upon which modem sewerage is based.
In 1857, Adams was commissioned to sewer
the city of Brooklyn, which then covered 20
square miles. There was no data
available in proportioning sewers
for the needs of the people. Yet,
working from scratch, Adams developed guidelines and
designs that made modem sanitary
engineering possible. More importantly,
he published the results. By the
end of the century, how to textbooks
would be available for towns and
cities to use all across the country.
The pieces to the puzzle of good plumbing had finally
come together proper venting,
waterworks and sewers brought
the closet indoors to stay. American
potters duplicated the successes
of their English predecessors,
and then some. Finally, the mass
production line brought down the
cost of production of fixtures,
fittings and valves, making them
affordable and available from
the rich on down. With the final
correlation between disease and
water borne bacteria the impetus
to plumbing was complete.
The Closet Evolves: The development of the
water closet in the United States parallels the experience of England where the modern closet was invented. But until
the development of a one piece
toilet with no metal parts, the
closet would continue to be a
source a contamination and a health
hazard.
Like in England, the conical-shaped hopper
was invented first. It set into
a lead trap that was placed under
the floor. Flushed by a valve
directly connected to the bowl,
it readily became a source of
contamination.
Next came the pan closet, consisting of an upper
earthenware basin and a shallow
copper pan containing 3-5" of
water as a seal at its base. It
could be tipped to discharge the
contents into a lower, large cast-iron
receptacle connected to the drainage
system. The metal pan operated
on hinges, activated by a lever.
The washdown closet followed the principle of pan
closets. The water was flushed
by a direct line from a storage
tank in the attic. Pull the handle
in the closet, and it opened a
valve at the top of the chamber.
It was connected by a copper wire.
The water flowed until the handle
was released. It scored a complete
flush as the water struck against
a piece of sheet lead inside the
bowl and caused a spray in all
directions.
Unlike earlier models, a short hopper closet followed
that was set on a tray, and the
trap was placed above the floor.
Originally made of stoneware,
it was practically impervious.
But later on, fireclay closets
would be passed off to unwary
customers.
The first American patent for a plunger closet
is attributed to William Campbell and James T. Henry in 1857. It resembled the twin-basin
water closets deplored by the
great English engineer, S.S.
Hellyer. The mechanism was
unsanitary, as was the trapless
closet of George Jennings.
John Randall Mann, and American, developed
a siphonic closet in 1870. Three
pipes delivered water into the
basin; one fed the flushing rim
around the basin's edge, one discharged
about a half gallon rapidly into
the basin and started the siphonic
action, and the third provided
the after flush.
William Smith developed a jet siphon
closet in 1876. It was carried
still further by the famous American
sanitary engineer Col. George
E. Waring, Jr., into larger
and more complicated pieces of
sanitaryware.
Thomas Kennedy, another American, patented
a siphonic closet which required
only two delivery pipes, one to
flush the rim, the other to start
the siphon. William Howell improved it in 1890, when he eliminated
the lower trap without detriment
to the action.
Ten years later, Robert Frame and Charles
Neff of Newport R.I., produced the prototype
of America's siphonic washdown closet,
although it sometimes failed to
develop the necessary action and
the contents overflowed. Another
decade passed before a redesigned
bowl by Fred Adee would
spur the production of the siphonic
closet in America.
In the early 19th century, U.S. production of the closet
was inferior to the English, and
most closets were imported. By
1873, 43 British firms, including
Twyford, Doulton, and Shanks were
exporting high-quality closets
to the U.S.

Left: A luxury bathroom of the
1890s would feature wood-encased
fixtures in Victorian spendor.
By century's end, U.S. manufacturers caught up
with the Europeans, and American
products began to swamp this market.
The American sanitary industry
was said to have been born when
pottery maker and decorator Thomas
Maddock teamed up with his
friend William Leigh. The
timing was none to soon, because
importing English materials was
a very costly endeavor.
It was tough to convince fellow Americans to buy
American products, however, so
Maddock carefully stamped each
closet with a lion and a unicorn,
and the following inscription:
"Best Stafford Earthenware made for the
American market."
Harington had suggested a basin of brick, stone
or lead dressed with pitch, resin
or wax. Since then, stoneware,
earthenware, fireclay and vitreous
enameled porcelain led the way.
Salt glazing was an early breakthrough;
the process covered the materials
with an impervious glaze which
offered new resistance to stain
and liquid.
Decorations were confined first to the bowl's interior
because the wooden surround precluded
any outside design-no one would
see it. When the washout and the
washdown models were now exposed
in their entirety, the water closet
became not only a functional product
but an artistic one as well. The
outside bowl could be embossed
or colored for esthetic choice.
Pedestal models proved most popular, highlighted
with elaborate patterns and fanciful
names. Popular examples were the
English Lion and the Dolphin models.
The Dolphin curled up into letter
S, the bowl in the shape of a
fluted shell. (Carvings of dolphins
had separated the seats used by
the Roman soldiers in the privy
at Timgad, an ancient Roman city
in what is now Algeria.) A Dolphin water closet
of Edward Johns & Co. won
a Golden Award for design at the
Great Philadelphia Exhibition in 1876. (The
company today, Armitage Shanks,
has reproduced the original "Dolphin
Suite," complete with mahogany
toilet seat, vanity doors and
polished brass taps and fittings.)
Underglaze patterns became popular, too, as well
as hand-painted patterns of birds,
flowers and fruit. Usually applied
after the glazing, particularly
with fireclay and similar materials,
these underglaze decorations were
less permanent. Gilding was the
most expensive decoration: a specially-prepared
gold, ground down with alloys
and flux, compounded with turpentine
and oil base, was applied by brush
on an already embossed pattern.
Without extensive piping and adequate sewer and
supply systems, however, the "modern"
water closet would have gone the
way of Harington's old relics.
Early American plumbers, unschooled
in the impressive engineering
feats of their old Roman forerunners,
would have to learn on their own
how to build and construct comparable
supply and waste systems. The
method was still trial-and-error.
Bathrooms Come Of Age: For the well-to-do, an
unused bedroom converted into
the novel bathroom. The practice
probably foreshadowed the trend
of present-day "empty-nesters"
to make unused bedrooms into fitness
and relaxation centers. By the
mid-1850s, however, finer new
homes were being designed with
separate bathrooms.
Benjamin Franklin is said to have imported
the first bathtub to America. Brought over from France in the 18th century, this
early creation was made of sheet
copper shaped like a shoe, and
hand-filled by bucket. A more
common model would be in the shape
of a mummy's tomb, all wood and
six feet long.
Left: An earth closet used
indoors used fresh earth or ashes
on the bottom of the wood structure
to absorb ordors.
The popularity of tub-bathing grew as the country
flourished and expanded. For example,
only 200 people resided in Tucson, Ariz., in 1865. By 1871, however,
the town would boast 3,000 people,
a newspaper, a brewery, two doctors,
several saloons and one bathtub.
But the country's first bathtub with fittings-was
commissioned by a Mr. Thompson
of Cincinnati, Ohio, in 1842. He envied the
invention of Britain's Lord John Russell and had the same tub duplicated
for himself. The tub was encased
in mahogany and lined with sheet
lead. It measured 7'x 4', and
weighed nearly one ton.
The fittings connected to two pipes running from
the attic tank. One pipe carried
cold water, the other was a hot
water pipe that coiled down the
chimney. The water heated as it
passed through the coil.
Grander bathtubs a century later were encased in
paneled or embossed wood. Big,
brass fixtures were bold and showy
in Victorian splendor. George
Vanderbilt's bathroom of 1855
boasted a porcelain tub, and featured
exposed pipe for all to see, the
fittings reduced to a neat arrangement.
Those with money tried to emulate
Queen Victoria's bathroom where, it was
said, the controls looked like
those for a battleship.
The old Saturday night bath in front of the kitchen
fire or potbellied stove was of
tin or copper. Lead "gave
way" to cast iron, which
in turn was the forerunner of
the modern enameled iron tub.
Now we can add porcelain enameled
iron and steel and acrylic, too.
By the turn of the century, a luxury bathroom would
be a grand-sized room, outfitted
with a 5-foot enameled tub, shower
bath and receptor, sitz bath,
foot bath, pedestal lavatory and
siphon jet closet. Including all
the fittings, trim and traps,
the cost would come to $542.50.
(Heavy tasseled drapes and stained
glass windows were extra, of course.
Although patterned wallpaper would
yield to tile on the walls and
the floor, the big area carpet
would remain.)
When Johnny came marching home after the wars,
builders could not keep up with
the demand for housing. A land
shortage in the throes of urban
development sparked cubbyhole
apartments and smaller homes than
before. Tract housing would be
one answer; downsizing the bathroom
in sacrifice for more space was
another tradeoff. Pedestal lavs
disappeared as vanities with storage
cabinets below topped the trend.
Today, the reverse is true - bathrooms
are bigger, the fixtures more
imposing than ever. And at least
two bathrooms are a must in most
new houses.
Today, there are tubs for two and oversized tubs
with accompanying oversized faucets,
and lavs constructed from all
materials including marble and
precious stone. Where chrome and
nickel plated faucets stood, luxury
materials such as gold, malachite,
tiger's eye, onyx and polished
granite would take their place.
In such a setting, King Midas
might well turn green with envy.
The growth of plumbing in America was phenomenal. In one
25-year period, from 1929 to 1954,
sales by distributors of plumbing
products and heating equipment
rose from $498 million to $2.33
billion, a whopping 367% increase.
And manufacturers would cater to the increased
demand with myriad choices of
materials, colors and styles.
Forerunners of great plumbing
companies today would make their
first appearances in the 1890s:
Crane Co., National Tube Works
(U.S. Steel), Ahrens & Ott and American Radiator
(predecessor companies of American-Standard),
and the Kohler Company, to name
just a few. The single-handle
mixing faucets so commonplace
today are actually less than 50
years old. Al Moen is credited
with the design for a double-valve
faucet with a cam to control the
two valves that he made in 1937.
He refined the design into a cylinder
with a piston action. Continued
refinement has led to the replaceable
cartridge, push-button diverter,
back-to-back installation, swivel
spray and pressure balancing valve.
Stainless steel is also a relative newcomer to
the surging market of plumbing
materials, perhaps exemplified
by the growth of Elkay Mfg. Originally
incorporated to manufacture pantry
sinks of German silver and polished
copper, Elkay added a line of
d steel scullery sinks in 1921.
By the 1950s, the company was
spurring lines of sinks and faucets
in stainless steel that would
become mainstays of the plumbing
industry.
Flexible water supplies are fairly recent developments
as well. They were pioneered by Robert M. Zell the founder
of Brass-Craft Mfg., back in 1939.
But today's manufacturers are not content to rest
on past successes, as research
and development produce better
pipes, valves, fittings and fixtures.
In the 19th century, plumbers
used plain or tin lined lead piping
for cold-water service, but they
also had a choice of tin-lined,
galvanized, enameled or rubber-coated
wrought iron piping. Copper tubing
was added after World War 1, and
now plastic under certain conditions.
Left: This wooden box encloses
a square water closet from early
American days.
It seems that the wonders of the Ancient World
and the Old Roman
Empire have come full circle. Presently
under construction is a grand
hotel complex in Scottsdale, Arizona. It is patterned after
the Hanging Gardens of Babylon. There will be 10 pools,
28 fountains, 47 waterfalls, a
man-made sand beach and a Roman-style
aqueduct. Under the watchful eye
of the old Hohokam spirits, about
28 basic plumbing systems will
be used to make this feat possible.
Of Codes And Men: It was only after the Civil
War that the germ theory of disease
was proven true, that contagion
could be traced to contaminated
water supply and unsanitary waste
disposal. With waves of cholera,
typhus and typhoid fever sweeping
the country, the people turned
to the resources of government
to investigate the causes.
The English Pubic Health Code of 1848 became a
model plumbing code for the world
to follow. Twenty years later,
the New York Metropolitan Board of
Health was formed, the first such
health board in the United States. Two years later, its
Metropolitan Health Law was considered
the most complete health legislation
in the world. The nature of ground
water was studied, as were drainage,
sewage, water supply, waste disposal
and location and characteristics
of water closets. The plumber,
long vilified in early years,
saw his status upgraded to that
of the Sanitarians
The idea of sanitary plumbing systems within buildings
was an American development that
soon spread throughout Europe. Over the next two decades
and more, plumbing health codes
expanded coverage to encompass
examination, and licensing.
Trade associations were formed, spearheading plumbing
ordinances and laws for regulations
and examination. Master plumbers,
while they had developed methods
of trapping and venting to guard
against contamination, had no
real knowledge of hydraulic principles.
So they installed systems they
didn't understand or know how
to design. Standards had to be
proposed, and lessons in business
management learned.
Appropriately, the National Association of PHCC
(formerly the National Association
of Master Plumbers), first met
in committee in 1883 at the old
Astor House, the hotel that provided
the impetus to modern plumbing
back in 1834. Many new plumbing
inventions had appeared and too
many plumbers were ill-prepared.
Close on their heels would be
the Mechanical Contractors Association
of America, the American Society
of Heating, Refrigerating and
Air Conditioning Engineers, and
the American Society of Sanitary
Engineering.
Wholesalers banded together, too starting programs
to prod manufacturers into standardizing
such things as sink and basin
outlets, faucet drilling, trap
gauges, etc. The Central Supply
Association, for example, was
formed in 1894 and soon made contacts
with the old Eastern Supply Association,
the Plumbers Association of New
England and the National Association
of Master Plumbers. But it would
take another 30 years to accomplish
the standardization on which everybody
takes for granted today.
An outbreak of amoebic dysentery in Chicago during the 1933 World's
Fair was traced to faulty plumbing
in two hotels. Tragic results
were 98 deaths and 1,409 official
cases. One year later, Major
Joel Connolly, Chief Inspector
of the Chicago Bureau of Sanitary Engineering,
spoke these prophetic words:
"One of the lessons to be drawn from the amoebic
dysentery outbreak ... is that
plumbing demands the very best,
painstaking effort that thoroughly
qualified, certified plumbers
can give in every building, and
especially where the systems are
complicated and extensive, and
where large numbers of people
may be affected by contamination
of water."